Collection: Battery System Monitoring

The Cerbo GX is a flexible communication centre that will take remote monitoring to the next level. With all the hardware connection possibilities to fit your every need.

The Victron Colour Control GX provides control and monitoring for your Victron system through a colourful graphical display.

This device will bring 4G LTE-M connectivity to all VE.Direct enabled devices without any monthly fees or subscriptions, for the first five years.

Single-phase and three-phase energy meters for Victron ESS systems.

The Victron VE Direct Bluetooth Smart Dongle enables Victron MPPT Charge Controllers*, Battery Monitors* and Pheonix Inverters* to display information on IOS, Android, Windows or Mac OS X devices using the VictronConnect app.

This bluetooth accessory for Victron inverter/chargers: Multis, MultiPlusses, MultiPlus-II, Quattros, and Phoenix Inverters with a VE.Bus port enables remote system monitoring and operation using the VictronConnect app.

The GX LTE 4G is an accessory for Victron's GX range monitoring products, including the Cerbo GX and Colour Control GX.

Temperature sensor for MultiPlus, Quattro and Venus GX products.
MultiPlus and Quattro units are supplied with this temperature sensor.

Wi-Fi dongle to connect Colour Control to WEP, WPA and WPA2 secured networks where running a network cable to router or access point is unsuitable. 

This long range dual-band wireless-N USB network adapter enables the Victron Colour Control GX to connect to a WiFi network via the Colour Control's USB connection.

The Victron AC Current Sensor is used to measure AC current, Power (VA) and calculate the energy produced by a solar PV inverter connected to the AC input or output of a Victron MultiPlus or Quattro.

This panel is intended for remote on/off control of all the VE.Direct Phoenix inverter models.

The Victron Digital Multi Control GX is remote control panel for Multiplus & Quattro inverter/chargers. It includes a rotary knob to set power control and power assist levels for two AC sources.

Used to connect Victron VE.Bus products such as the MultiPlus or Quattro to a PC for configuration, either with VictronConnect or the VE Configuration tools for VE.Bus Products.

Used to in either VE.Can or BMS-CAN ports to terminate the CAN-bus network. Includes 2 terminators for use at both end points of the CAN-bus network.