Collection: Labels for Wind Systems

Pack containing labels needed for a typical domestic wind turbine installation

Dual supply labelling should be provided at the service termination, meter position and all points of isolation between the PV system and supplier terminals to indicate the presence of on-site generation and indicating the position of the main a.c. switch disconnector.

It is recommended that Inverters carry a sign stating "Inverter - isolate a.c. and d.c. before carrying out work"

Connectors readily accessible to ordinary persons shall be of the locking type, requiring a tool or two separate actions to separate and shall have sign attached that reads: 'Do not disconnect d.c. plugs and sockets under load'.

For use on all equipment directly supplied by a wind turbine.

For use on wind turbine output isolator enclosure.

For use on all wind turbine output cable junction boxes.

For use on all AC switches/disconnects.

For use to identify the wind system generation meter.