Labels
Suitable labelling is required in wind & PV systems and MCS guidelines give recommendations and requirements for these. All labels must be clear, easily visible and should be constructed and fixed so as to remain legible and in place throughout the design life of the system. The Wind & Sun label packs are suitable for typical domestic systems or labels are available in sheets of one type.
Actual dimensions of the labels may differ slightly from the ones listed.
-
PV Label pack
Pack containing labels needed for a typical domestic solar PV installation.
-
Warning dual supply label
Dual supply labelling should be provided at the service termination, meter position and all points of isolation between the PV system and supplier terminals to indicate the presence of on-site generation and indicating the position of the main a.c. switch disconnector.
-
Inverter Label
It is recommended that Inverters carry a sign stating "Inverter - isolate a.c. and d.c. before carrying out work"
-
Labels for Solar PV Systems
Shop all -
Wind Label Pack
Pack containing labels needed for a typical domestic wind turbine installation
-
Warning dual supply label
Dual supply labelling should be provided at the service termination, meter position and all points of isolation between the PV system and supplier terminals to indicate the presence of on-site generation and indicating the position of the main a.c. switch disconnector.
-
Inverter Label
It is recommended that Inverters carry a sign stating "Inverter - isolate a.c. and d.c. before carrying out work"
-
Labels for Wind Systems
Shop all -
Energy Storage Systems - Warning Multiple Supplies Label
Used in systems incorporating energy storage systems (including batteries and inverter/chargers) with grid connected solar photovoltaic systems. To be positioned at the grid supply point and at all points of isolation.
-
Battery in installation label
Used in systems incorporating energy storage systems (including batteries and inverter/chargers) in a building. This should be fixed:
a) at the origin of the electrical installation;
b) at the metering position, if remote from the origin; and
c) at the consumer unit or distribution board to which the AC supply from the inverter is connected. -
Battery in installation - Solar PV on roof label
Used in systems incorporating energy storage systems (including batteries and inverter/chargers) with grid connected solar photovoltaic systems in a building. This should be fixed:
a) at the origin of the electrical installation;
b) at the metering position, if remote from the origin; and
c) at the consumer unit or distribution board to which the AC supply from the inverter is connected. -
Labels for Battery Systems
Shop all
Labels for Solar PV Systems
Suitable labelling for PV systems as required by MCS guidelines.
Labels are printed on self adhesive vinyl and are designed to remain legible and in place throughout the design life of the system. The Wind & Sun label packs are suitable for typical domestic systems or labels are available in sheets of one type.
Read more
Large quantities are also available on a roll by request.
Read less
Labels for Wind Systems
Suitable labelling for wind systems as required by MCS guidelines.
Labels are printed on self adhesive vinyl and are designed to remain legible and in place throughout the design life of the system. The Wind & Sun label packs are suitable for typical domestic systems or labels are available in sheets of one type.
Read more
Large quantities are also available on a roll by request.
Read less
Labels for Battery Systems
Suitable labelling for battery systems as required by MCS guidelines.
Labels are printed on self adhesive vinyl and are designed to remain legible and in place throughout the design life of the system. Labels are available individually or in quantity on sheets of one type.
