-
Rutland 914/Furlmatic 910 Land Tower Kits
Suitable for erection onto concrete foundations. Recommended for all permanent installations.
Consists of three 2.13m long tower sections with joiners complete with rigging kit which includes: -
Rutland 914i Windcharger
Rating: 140 W in a 11 m/s (24.6 mph) wind.
Voltage: 12 or 24 volts DC.
Rotor Diameter: 0.91m
Cut In Windspeed: 3.1 m/s (6.9 mph) -
Rutland Accessories
HRSI Regulator
Uses Pulse Width Modulation (PWM) to protect battery from overcharging by tapering charge as battery becomes full and reducing the Windcharger speed. Includes LED indicators for charging status and battery voltage. Includes facility for connection of up to 160W of PV. Features windcharger shutdown switch. -
SafeCurrent Battery Monitor
The SafeCurrent Battery Monitor enables remote monitoring of your battery voltage, temperature and location of the device based on mobile phone mast triangulation. Ideal for boats or remote equipment.
-
Santon Combined AC & DC Isolator
Save space, installation time and money with this combined AC and DC isolator. 1 string and 2 string options available.
-
Schletter Ballast Tray Pro
Can be fastened between Base Rail Pro to accomodate extra gravel ballast if required.
-
Schletter Ballast+ Rail Pro
Used to support ballast blocks more ballast is required than can be accomodated on the Base Rail Pro.
-
Schletter ClampFit Pro Fastener
The Schletter ClampFit Pro Fastener is a simple and cost-efficient solution for mounting modules in landscape on trapezoial metal roofs with a minimum thikness of 0.5 mm.
-
Schletter Cross Connector
Used to allow horizontal mounting rails to be quickly & easily fastened to vertical rails.
-
Schletter Cross Connector Rapid Pro
Used to allow horizontal mounting rails to be quickly & easily fastened to vertical rails.
-
Schletter EcoLight Mounting Rails
Aluminium module-bearing profile rails - 450mm length rail is used with 2 x SingleFix Pro (SCH-113009-003).
-
Schletter Elevation Pro
These allows gradual adjustment of the angle of inclination and are mounted to the Base Rail Pro. It is completed by adding a Module Support Pro, which can also be clicked into place.
*see manufacturer's documentation for further information