-
PV array DC junction box label
The d.c. junction box must be labelled with: 'PV array d.c. junction box, Danger contains live parts during daylight'.
-
PV array DC isolator label
The switch must be labelled as 'PV array d.c. isolator', with the ON and OFF positions clearly marked. Switch enclosures should also be labelled with 'Danger - contains live parts during daylight'.
-
PV Array DC charge controller label
Charge controllers must be labelled with: 'PV array DC charge controller, Danger contains live parts during daylight'.
-
Morningstar ProStar MPPT
The Prostar MPPT™ solar charge controller uses TrakStar Technology™ for advanced maximum power point tracking (MPPT) battery charging. Suitable for Lithium, Nickel Cadmium, and Lead Acid battery types.
-
Morningstar ProStar
These tropicalised 15 & 30A controllers provide longer battery life and improved system performance. LED's indicate battery status and faults. Digital metering shows voltage & current plus 9 different controller status parameters. Automatic battery equalisation or can be used with sealed and gel batteries. Includes a manual PV and load disconnect button. Versions for 12V, 24V or 48V systems.
-
Power Supply for SMA Data Manager and SMA Cluster Controller
DIN Rail mount power supply for use with the SMA Data Manager M and SMA Cluser Controller.
-
Outback Spares
OutBack inverters have a worldwide reputation for reliability and long service. However, since they are often used in remote locations they are designed to be field serviceable with replacement parts in the unlikely event of a failure. Step by step instructional videos are available.
-
OutBack Panel Mount Circuit Breakers
Panel mounted hydraulic-magnetic type circuit breakers that can be used for DC sources, inverters or load circuits.
-
OutBack FLEXware 250
For single inverter/charger installations. Enclosure can be mounted on each end of an inverter. Accommodates AC & DC circuit breakers & Bypass assembly.
-
OutBack FLEXware 1000
Expandable system for up to four OutBack FXR Series inverter/chargers, up to four OutBack charge controllers, a Mate system controller, a Hub communication manager, and all the required DC & AC components & wiring.
-
OutBack DIN Mount Circuit Breakers
DIN rail mountable, hydraulic magnetic type circuit breakers that can be used for input, output or load circuits.
-
N Type Ground Mounts
These structures provide a higher level mounting for medium sized systems with easy installation.
-
MY-PV Power Meter
The MY-PV Power Meter allows excess solar generation (normally exported to the grid) to be automatically diverted to heaters in order to maximise the self-consumption of your PV system. It detects the energy flows of the PV system and transmits the excess energy data to the PV Power Manager AC•THOR, AC•THOR 9s.
-
MY-PV ELWA DC Immersion Heater
For direct connection to a dedicated PV system using 4-8 standard 60 cell modules. The DC current from the photovoltaic modules is controlled with a MPP-Tracker for a maximum power output of the immersion heater (up to 2kW). No connection to a grid supply or inverter is required.
-
MY-PV AC•THOR 9s
The AC•THOR 9s is a Photovoltaic-Power-Manager for hot-water and space-heating for use in 3-phase systems.
*see manufacturer's documentation for further information