Collection: Schletter

Base rail for Schletter FlatGrid and FixGrid 18 systems.

Use the lower FixZ support together with the FixZ centre supports (for the east-west direction) or with the upper FixZ profiles (for the south direction).

Windsafe sheets with integrated ballast tray for theSouth facing applications.Used to provide the necessary ballasting in regions with higher wind loadings.

Flush mounted installations on low-pitch trapezoidal roofs may be less than ideal for self-cleaning and maximum yield. At the same time using conventional struts may not be possible or uneconomical due to higher loads. In these cases FixZ Pro offers flexibility, with a universal and cost-effective solution that optimises load transfer to the roof while providing optional tilt angles as desired.

Used for fastening mounting rails to corrugated roofs. Hanger bolt is screwed through the roof cladding and an adaptor plate bears the mounting rail. A UV-resistant EPDM sealing washer and collar are used to seal the drilled hole.

Accepts Proline module clamps for fastening of modules.

End Caps - one size to suit either 35, 50 or 70 mm mounting rails

• Material: Aluminium EN AW 6063 - T66
• Can be combined with roof hooks, connectors and module clamps of the ProLine series
• Can also be combined with the SingleFix Pro trapezoidal sheet fastener

Internal connector - for joining mounting rails
The integrated position lock means that no additional screw connection is required.

RapidPro module clamps

These roof hooks are faster to install than ever.
They make quick and flexible installation possible by hooking in and fastening with just one Torx pan head screw. The assembly is simplified by first, mounting the screw-on plate on the rafters and then snapping in the bracket afterwards.

This is a modular system for mounting large PV arrays in open areas.  Made with high quality components, it allows easy to erect economical systems with long lifetimes. Ideal for small to medium sized PV plants where the cost of pile-driven supports is prohibitive or not possible.

These are suitable for a wide variety of pitched roofs, considerably reduce assembly time and include an innovative, rotatable multi-adapter attachment for quick and easy fitting of mounting both Solo and Pro mounting rails

Used to allow horizontal mounting rails to be quickly & easily fastened to vertical rails.

Rapid 16 aluminium module clamp system.

Used to connect Module Support Pro, Elevation Pro or Ballast+ Rail Pro to Base Rail Pro.