-
Victron Blue Solar Charge Controller MPPT 100/30 & 100/50
These Victron Blue Solar Charge Controllers support a PV input with a maximum open circuit voltage of 100V and have a maximum output of 30A or 50A respectively. They work with and will automatically recognise 12V/24V battery systems.
-
Victron Blue Solar Charge Controller MPPT 150/35 & 150/45
These Victron Blue Solar Charge Controller supports a PV input with a maximum open circuit voltage of 150V and have maximum outputs of 35A and 45A respectively. It works with and will automatically recognise 12V, 24V and 48V battery systems (36V also possible via software configuration).
-
Victron Blue Solar Charge Controller MPPT 150/45 up to 250/100
These Victron Blue Solar Charge Controller supports a PV input with a maximum open circuit voltage of either 150V or 250V and have a maximum output of up to 100A. It works with and will automatically recognise 12V, 24V and 48V battery systems (36V also possible via software configuration).
-
Victron Blue Solar Charge Controller MPPT 75/10, 75/15,100/15 & 100/20
These Victron Blue Solar Charge Controllers support a PV input with a maximum open circuit voltage of 75V or 100V respectively and have a maximum output of 20A. They work with and will automatically recognise 12V and 24V battery systems, except the VBS-MPPT100/20-48 which can be used with 12, 24 or 48V systems.
-
Victron BlueSolar Polycrystalline Panels
Victron BlueSolar polycrystalline panels are well sized for use in battery systems, from small off-grid systems to boats, caravans, motorhomes and more.
-
Victron Cerbo GX
The Cerbo GX is a flexible communication centre that will take remote monitoring to the next level. With all the hardware connection possibilities to fit your every need.
-
Victron Colour Control GX Display/Monitor
The Victron Colour Control GX provides control and monitoring for your Victron system through a colourful graphical display.
-
Victron Colour Control WiFi Module - Long Range
This long range dual-band wireless-N USB network adapter enables the Victron Colour Control GX to connect to a WiFi network via the Colour Control's USB connection.
-
Victron Colour Control WiFi Module - Short Range
Wi-Fi dongle to connect Colour Control to WEP, WPA and WPA2 secured networks where running a network cable to router or access point is unsuitable.
-
Victron Compatible Energy Meters
Single-phase and three-phase energy meters for Victron ESS systems.
-
Victron Current Transformer for MultiPlus-II
Current transformer for the MultiPlus-II to implement PowerControl and PowerAssist optimising self-consumption with external current sensing.
-
Victron Cyrix Battery Combiners
Used for instance to connect engine starter and service batteries to allow charge from the same alternator, whilst prioritising charge to the starter battery.
-
Victron Cyrix Intelligent Charge Relays
The Cyrix-Li-Charge will connect a battery charger with 3 seconds delay: – if the Charge Disconnect output of the VE.Bus BMS is high, and – if it senses 13,7V (resp. 27,4V or 54,8V) or more on its battery charger connection terminal, and – if it senses 2V or more on its battery terminal (the Cyrix will remain open, if not connect to the battery).
-
Victron Cyrix Intelligent Load Relays
The Cyrix-Li-load will disengage when its control input becomes free floating. If the battery voltage recovers after disconnection (which will happen when no other loads are connected to the battery), the output of the BMS will become high and the Cyrix will reengage after 30 seconds. After 3 attempts to reengage, the Cyrix will remain disengaged until battery voltage has increased to more than 13 V (resp. 26 V or 52 V) during at least 30 seconds (which is a sign that the battery is being recharged).
-
Victron Digital Multi Control 200/200A GX
The Victron Digital Multi Control GX is remote control panel for Multiplus & Quattro inverter/chargers. It includes a rotary knob to set power control and power assist levels for two AC sources.
*see manufacturer's documentation for further information